In the last post I mentioned how you should keep the piece of paper that you cut out from your stencil. You can use it to block an area of paper by painting the space around it, a technique called masking. Using the same brush and paint as I did in my last post, I painted over the piece of paper I cut out to make the scissors shape.
When I pull the mask away this is how it looks on the printed paper. The area underneath where the mask was should be almost completely free of paint. You can continue carefully painting the rest of the paper without the stencil.
Once the red paint had dried I went back and put the original stencil over the scissor shape. I then painted that shape with the light red color. So with this process of alternating between the stencil and the masking paper I was able to apply two separate layers of paint and keep the stencil shape intact.
Intermission (2 Recent Field Recordings)
Using Found Objects
If you’re interested in trying a more free form approach to masking off areas of your paper you can try working with found objects. For the next series I collected some fallen leaves and assembled them on my paper. Since these leaves are not sitting flat on the paper there will not be as clear of an edge to the shapes.
The next step will be to apply the paint/ink. Since these objects do not sit flat on the paper I chose to use a small spray bottle instead of a brush to make the print. I filled the bottle with sumi ink, which is a water-based black ink. I sprayed the ink over the leaves, keeping the spray pointed in the same direction throughout.
The 2 examples below are what I came up with using this technique. This process produced looser and more organic results than would be acheived with a paper mask or stencil.
